Short description text

Dimensions: Height: 5cm Depth: 27.3cm Width: 35.2cm
No assembly required
Material: Ash wood
Care: Wipe with a damp cloth
Material: Ash Wood

The post Different – test2 appeared first on Shedload Designs.

The wine racks are priced per layer. You can stack as many layers as you would like. This listing is for the 4 slot wide wine rack.

The racks are also designed to be stacking and can be added to over time to increase capacity. Don’t forget to add a curved top layer if you’d like to complete the look – the racks work perfectly well without a top layer.

Although the wood selection in the standard versions is designed to complement the range of boards, typically the lighter wood will form the side and the darker wood the transverse bars, there is no limit to what the wood combination could be, from entirely one wood to a complete mix of woods.

For this reason, most wine racks are made to order, as the number of wood combinations is enormous and precludes holding stock of all but the most common woods.

An additional benefit is that the range of woods for wine racks is much wider than the range for cutting boards as we can use more UK sourced woods such as sycamore or alder, which are too soft for chopping boards.

We can also use woods such as Yew, which has a wonderful range of reddish hues, but which is not suitable for food contact. Additionally, the racks can be made from wood recovered from old or broken furniture that might otherwise be burnt.

If you wish to discuss a custom order – please email robert@shedloaddesigns.co.uk before placing an order.

Dimentions

600mm wide, 340mm deep, 135mm high

The post 4 Slot Wine Rack (Price per layer) appeared first on Shedload Designs.

The wine racks are priced per layer. You can stack as many layers as you would like. This listing is for the 6 slot wide wine rack.

The racks are also designed to be stacking and can be added to over time to increase capacity. Don’t forget to add a curved top layer if you’d like to complete the look – the racks work perfectly well without a top layer.

Although the wood selection in the standard versions is designed to complement the range of boards, typically the lighter wood will form the side and the darker wood the transverse bars, there is no limit to what the wood combination could be, from entirely one wood to a complete mix of woods.

For this reason, most wine racks are made to order, as the number of wood combinations is enormous and precludes holding stock of all but the most common woods.

 An additional benefit is that the range of woods for wine racks is much wider than the range for cutting boards as we can use more UK sourced woods such as sycamore or alder, which are too soft for chopping boards.

 We can also use woods such as Yew, which has a wonderful range of reddish hues, but which is not suitable for food contact. Additionally, the racks can be made from wood recovered from old or broken furniture that might otherwise be burnt.

If you wish to discuss a custom order – please email robert@shedloaddesigns.co.uk before placing an order.

Dimentions

Top layer 600mm wide, 340mm deep, 135mm high

The post 6 Slot Wine Rack (Price Per Layer) appeared first on Shedload Designs.

Available in standard combinations of Ash and Sapele Beech and Paduak or Maple and Walnut. The woods have been chosen to complement each other both in colour and grain and finished to preserve the natural contrast of the timbers.

The woods used are selected to be of a Janka hardness in the range of approximately 1000 to 1600. Woods that are softer than this will wear and disintegrate over time; woods that are harder will tend to damage the edge of the knife being used

Dimensions +/- 2mm: Length 500mm, Width 295mm, Thickness 32mm. Wood is a natural material and cannot always be made to exactly the same tolerance.

Each board is finished to a very high standard and sealed with a combination of oils and waxes to preserve the woods and the working surface. Please see advice on board maintenance.

Boards ordered via the website are packed in their own display case before being packaged for dispatch by courier.

The post Carving Board appeared first on Shedload Designs.

Available in standard combinations of Ash and Sapele Beech and Paduak or Maple and Walnut. The woods have been chosen to complement each other both in colour and grain and finished to preserve the natural contrast of the timbers.

The woods used are selected to be of a Janka hardness in the range of approximately 1000 to 1600. Woods that are softer than this will wear and disintegrate over time; woods that are harder will tend to damage the edge of the knife being used

Dimensions +/- 2mm: Length 400mm, Width 180mm, Thickness 22mm. Wood is a natural material and cannot always be made to exactly the same tolerance.

Each board is finished to a very high standard and sealed with a combination of oils and waxes to preserve the woods and the working surface. Please see advice on board maintenance.

Boards ordered via the website are packed in their own display case before being packaged for dispatch by courier.

The post Serving Platter appeared first on Shedload Designs.

Available in standard combinations of Ash and Sapele Beech and Paduak or Maple and Walnut. The woods have been chosen to complement each other both in colour and grain and finished to preserve the natural contrast of the timbers.

The woods used are selected to be of a Janka hardness in the range of approximately 1000 to 1600. Woods that are softer than this will wear and disintegrate over time; woods that are harder will tend to damage the edge of the knife being used

Dimensions +/- 2mm: Length 500mm, Width 295mm, Thickness 32mm. Wood is a natural material and cannot always be made to exactly the same tolerance.

Each board is finished to a very high standard and sealed with a combination of oils and waxes to preserve the woods and the working surface. Please see advice on board maintenance.

Boards ordered via the website are packed in their own display case before being packaged for dispatch by courier.

The post Preparation Board appeared first on Shedload Designs.

Available in standard combinations of Ash and Sapele. Beech and Paduak or Maple and Walnut. The woods have been chosen to complement each other both in colour and grain and finished to preserve the natural contrast of the timbers.

The woods used are selected to be of a Janka hardness in the range of approximately 1000 to 1600. Woods that are softer than this will wear and disintegrate over time; woods that are harder will tend to damage the edge of the knife being used

Dimensions +/- 2mm: Length 400mm, Width 240mm, Thickness 22mm. Wood is a natural material and cannot always be made to exactly the same tolerance.

Each board is finished to a very high standard and sealed with a combination of oils and waxes to preserve the woods and the working surface. Please see advice on board maintenance.

Boards ordered via the website are packed in their own display case before being packaged for dispatch by courier.

The post Chopping Board appeared first on Shedload Designs.

Available in standard combinations of Ash and Sapele. Beech and Paduak or Maple and Walnut. The woods have been chosen to complement each other both in colour and grain and finished to preserve the natural contrast of the timbers.

The woods used are selected to be of a Janka hardness in the range of approximately 1000 to 1600. Woods that are softer than this will wear and disintegrate over time; woods that are harder will tend to damage the edge of the knife being used

Dimensions +/- 2mm: Length 300mm, Width 180mm, Thickness 22mm. Wood is a natural material and cannot always be made to exactly the same tolerance.

Each board is finished to a very high standard and sealed with a combination of oils and waxes to preserve the woods and the working surface. Please see advice on board maintenance.

Boards ordered via the website are packed in their own display case before being packaged for despatch by courier.

UK mainland delivery is included in the price. Delivery to the Highlands and Islands would, however, incur a supplementary charge. For these and other destinations, please contact robert@shedloaddesigns.co.uk prior to ordering.

The post Cheeseboard appeared first on Shedload Designs.